Lincoln Electric / Guides
Reading AWS Filler Metal Classifications
Most filler metals carry a class name from the American Welding Society (AWS). The name is a code. Once you can read it, you can tell a customer what a rod or wire does, and you can check that a substitute is the same class. AWS publishes a separate specification for each type of filler. The patterns below come from the AWS classification pages in Lincoln Electric's product catalog and welding guides.
Stick electrodes: E7018 and E6010
Read E7018 in pieces.
- E means electrode (a stick).
- 70 is the minimum tensile strength of the weld in ksi, or thousands of pounds per square inch. 70 means 70,000 psi. E6010 is 60 ksi.
- The next-to-last digit (the 1 in E7018) says which positions the rod can weld. In AWS practice 1 means all positions and 2 means flat and horizontal only. Lincoln's guide lists its E7024 rod (Jetweld® 1) as flat and horizontal only.
- The last two digits together tell the usable positions, the coating type and the current. Lincoln's catalog says they designate the welding position, the coating and the polarity, but its own table is a picture that could not be read as text. The pairs below come from Lincoln's stick guide product tables: 10 is a cellulosic rod on DC+ only (Fleetweld® 5P, E6010); 11 is a cellulosic rod for AC or DC (Fleetweld® 35, E6011); 13 and 14 are fast-fill rutile rods (Fleetweld® 37 is E6013, Fleetweld® 47 is E7014); 24 is a high-deposition rod (Jetweld® 1, E7024-1); 18 is a low-hydrogen rod (Excalibur® 7018, E7018 H4R).
So E6010 is a cellulosic rod that Lincoln lists for vertical and overhead work on DC+. E7018 is a low-hydrogen rod, widely used for structural steel.
Suffixes go after the number. -1 (as in E7018-1) marks improved toughness. A1, B2, C3, D2 and similar give the weld metal chemistry for low-alloy rods, such as 8018-C3. M (as in 11018M) means military-type requirements such as greater toughness, lower moisture content and mandatory hydrogen limits.
Hydrogen: H4, H8, H16 and R
A suffix like H4 or H8 is the diffusible hydrogen designator. It gives the maximum milliliters of hydrogen per 100 grams of weld metal: H4 means 4 mL or less. Lower hydrogen means a lower risk of cracking in high-strength or thick steel. An R after it, as in E7018 H4R, shows the electrode passes a moisture-resistance test. Keep low-hydrogen rods dry.
Solid wire and TIG rod: ER70S-6
- E or ER: E for electrode, R for rod. Wire used for both MIG and TIG often carries ER.
- 70: 70 ksi minimum tensile strength.
- S: solid wire. A C here would mean composite (metal-cored).
- 6: the chemistry. ER70S-6 has more manganese and silicon deoxidizers than ER70S-3, so Lincoln lists it for medium to heavy mill scale, while ER70S-3 is listed for clean to light mill scale.
Flux-cored and metal-cored wire: E71T-1C, E71T-11, E70C-6M
For flux-cored wire (AWS A5.20):
- E71T-1C: E for electrode, 7 for 70 ksi, 1 for all positions (0 is flat and horizontal only), T for tubular, 1 for the usability type, C for 100% CO2 shielding gas.
- A letter M in that last spot means a mixed gas of 75 to 85% argon with the balance CO2 (that is how Lincoln's A5.20 page words it; its metal-cored wire pages quote 75-80% argon).
- E71T-11 has no gas letter. That means it is self-shielded: it makes its own shielding and needs no bottle.
- A J means improved toughness: Charpy impact of 27 J (20 ft-lb) at -40 °F. H16, H8 or H4 are the optional hydrogen designators.
For metal-cored wire (AWS A5.18/A5.28), the pattern looks like solid wire but with a C: E70C-6M is an electrode, 70 ksi, composite (metal-cored), chemistry 6. The M is the shielding-gas letter, mixed argon/CO2.
Stainless: ER308L and the -15, -16, -17 suffixes
Stainless wire and rod (AWS A5.9) use the AISI stainless type: ER308L is the 308 type with L for low carbon. H after the digits means higher carbon, and Si means added silicon.
Stainless sticks (AWS A5.4) work differently: the three digits are the stainless type, and the dash number at the end is the coating:
- -15: fast-freezing slag, for out-of-position welds.
- -16: stable arc, out-of-position capable.
- -17: smooth arc in the flat and horizontal positions.
Submerged arc: F7A2-EM12K
Submerged arc names a flux and a wire together. Read F7A2-EM12K as:
- F: flux.
- 7: tensile strength times 10 in ksi (70 ksi class; Lincoln's example gives 70,000 to 95,000 psi).
- A: tested as-welded. P means post-weld heat treated.
- 2: temperature where the weld meets 20 ft-lb of impact: 2 means -20 °F, 4 means -40 °F, 6 means -60 °F.
- EM12K: the wire. E for electrode, M for medium manganese (L is low, H is high; a C after the E means a composite or cored wire), 12 for the carbon content in hundredths of a percent, K for silicon-killed steel.
The flux and wire together carry the class, which is why a certificate lists both.
What to do with it
Do not assume that a similar-looking name means an equal product. Check the full class, including the hydrogen letters and toughness suffixes, before offering a substitute.